Trusted Manufacturer of industrial gas detection products | Made in USA
Ammonia Sensor | GG-NH3 Duct Mount Enclosure
Roll over image to zoom in | Click to open expanded view

Ammonia Sensor | GG-NH3 Duct Mount Enclosure

Order Number: GG-NH3-DM
Low to mid range ammonia sensor designed for mounting in ventilation ducts.

Lead Time: 1-2 days

  • Includes a 2 year warranty on sensing element and transmitter.
  • Designed for ammonia detection in ventilation ducts.
  • Rated for maximum air velocity of 166 feet per second (10,000 feet per minute).
  • The GG-NH3 uses an ammonia specific electrochemical cell, designed to adapt to any harsh environment from -50°F to +140°F.
  • Circuit board sealed in potting material to protect sensitive sensor components and copper tracing from corrosion.
  • Weatherproof NEMA 3RX washdown-duty polycarbonate enclosure safe for outdoors and wash-down areas.
  • Built in 3 stage heater for freezing temperatures.
  • Select from a list of available ranges (0-100 or 0-250). Custom ranges available upon request.
  • Part Number (specify range): GG-NH3-100-DM | GG-NH3-250-DM



Size 7.5" high x 6.5" wide x 3.75" deep (not including mounting hardware)
Weight 3.0 lbs
Power Requirements 24VDC @ 350mA
Signal Output 4/20mA, 700 Ohm max input impedance
Temperature Range -50F to +140F (-46C to +60C)
Detection Electrochemical (diffusion method)
Certification ETL listed to UL standard 61010-1, and CSA standard C22.2 No. 61010-1-12
Warranty 2 years sensing element and transmitter
Please review these other products:

GG-NH3 Replacement Cell

Order Number: GG-NH3-RC
Replacement electrochemical NH3 cell for the GG-NH3. Also recommended for use with Manning EC-F2 / EC-F9 / EC-FX transmitters.

Lead Time: 1 day

Entrance Monitor | EM2

Order Number: EM2
The EM2 Entrance Monitor is used for remote display and/or as a single channel controller for gas detection systems.

Lead Time: 1 day